Ground Dynamic Mounting System SMS-211C with Adjustable tilt angle

Dynamic mounting systems (mechanical trackers) are support structures with photovoltaic modules (PV modules) located on them with the ability to change the angle to the horizon.

Variable-angle mounting systems make it easy to change the angle of the PV modules depending on the season.

Ground dynamic mounting system SMS-211C

An example of changing seasonal angles tilt of the PV system during the year:

• In the period from April 5 to April 20, the angle of inclination will change from 50° to 42°
• In the period from May 5 to May 20, the angle of inclination was changed from 42° to 34°
• In the period from July 5 to July 20, the angle of inclination changed from 34° to 26°
• In the period from July 5 to July 20, the angle of inclination will change from 26° to 34°
• In the period from August 5 to August 20, the angle of inclination changed from 34° to 42°
• In the period from September 5 to 20, the angle of inclination will change from 42° to 50°

The angle of inclination and their number can be changed according to the customer’s specifications.

This option allows you to increase the generation efficiency of your solar station by up to 10-12%.

Dynamic systems are based on designs with a two-row portrait or three-row landscape arrangement of PV modules.

Technical Specifications

Advantage:

• Generation increases by 10-12% (with an increase in investment at the construction stage of only 1-2%)
• Complete absence of snow on the PV system due to the high angle of inclination
• The mechanical angle change system is more durable than the automatic one
• Does not require constant repair and maintenance
• Takes up 25-30% less space than an automatic tracker system
• 10 years warranty

Design of the SMS-211C mounting system is carried out in accordance with the requirements:

• Eurocode EN 1990 “Fundamentals of building design”
• Eurocode EN 1991 “Actions on structures”
• Eurocode EN 1992 «Design of concrete structures»
• Eurocode EN 1992 «Design of concrete structures»
• Eurocode EN 1090 «Execution of steel structures – Technical requirements»

Manufacturing and installation of load-bearing structures and elements of the SMS-211C fastening system is performed in accordance with the requirements

• ISO 7599: 2018 «Anodizing of aluminium and its alloys – Method for specifying decorative and protective anodic oxidation coatings on aluminium»
• ISO 1461: 2009 «Hot dip galvanized coatings on fabricated iron and steel articles – Specifications and test methods»

Components of a dynamic SMS-211C systems with variable angle